Precautions for pressure testing hose storage

Oct 14, 2019

Precautions for the storage of pressure testing hoses:

1. The pressure testing hose should not be placed with corrosive products or placed in the volatilized gases of these products, and should be kept away from heat sources.
2. Do not park the device that can perform ozone in the pressure testing hose storage area.
3. When the pressure testing hose is stored, it should be placed according to different specifications. Do not confuse the stacking and mark the card for access.
4. In order to prevent the tube from being deformed under pressure during storage, the stacking should not be too high, and the normal height should not exceed 1.5m.
5. The pressure testing hose should be stored in the loose form as much as possible. For the hose with the inner diameter of 76mm or less, it can be stored in coil.
6. The warehouse where the pressure testing hose is stored should have a temperature between 0 ° C and 35 ° C. Observe ventilation and the relative humidity should be below 80%, and avoid the hose being exposed to direct sunlight.
7. The storage time of the pressure testing hose is not too long, and the time is too long, which will constitute an aging phenomenon. During the storage period of the hose, it should not exceed two years, and should be used first, so as to prevent the aging of the pressure measuring hose from affecting the quality of the hose due to storage for too long.
8. The pressure testing hose should be protected from sharp objects or ground equipment.
9. The pressure testing hose should be protected from damage by animals such as rats.

Precautions for pressure testing hose storagePrecautions for pressure testing hose storagePrecautions for pressure testing hose storage

Send Inquiry

REQUEST A QUOTE

Please enter the information below and we will process your request immediately. If you have an urgent requirement, please call us at +8613303041262 or [email protected].